Good to know
- All sizes are outside sizes of the folded bracket; the step between the two mounting faces is the overall height less one sheet thickness.
- Countersinks open on the top of each flange: right for screwing the bottom flange down, and for screws driven down through the top flange. In brushed, PVD or powder-coated sheet they open on the finished face instead.
- The flanges point away from each other, so both mounting faces stay clear for a nut or screw head.
- Each row of holes sits on the centre line of its flange and is spread evenly along the width.
- Plain holes are ISO 273 medium-fit clearance holes for the bolt size chosen.
Z bracket (offset bracket)
By Brox Metals
A folded Z bracket that steps one mounting face up from another, for standing a panel off a wall or joining parts at different levels. Set both flanges, the overall height and width, and the bolt holes in each flange.
- Made by
- Laser cutting and folding
- Shown in
- Mild Steel Mill finish 2 mm
- Overall size as shown
- 58 × 40 × 40 mm
RM 16.11 for one as shown, before tax.
Order this partSet your sizes, choose your material, finish and quantity, and see the price and ready date before you pay.
What you can change
| As shown | You can choose | |
|---|---|---|
| Bottom flange | 30 mm | 16.6 to 300 mm |
| Overall height | 40 mm | 15 to 300 mm |
| Top flange | 30 mm | 16.6 to 300 mm |
| Width | 40 mm | 20 to 1000 mm |
| Holes in the bottom flange | 2 | 0 to 3 |
| Bottom flange hole type | Plain clearance hole | 9 choices |
| Bottom flange bolt size | M6 (6.6 mm hole) | 7 choices |
| Holes in the top flange | 2 | 0 to 3 |
| Top flange hole type | Plain clearance hole | 9 choices |
| Top flange bolt size | M6 (6.6 mm hole) | 7 choices |
| Hole distance from ends | 10 mm | 6.3 to 15.2 mm |
Some ranges depend on the other sizes and on the metal you choose.