Good to know
- Sizes are on the flat sheet: the face is measured between the folds, and the rim before folding.
- The rim folds back toward the wall on all four sides; its corners are cut back so each side folds cleanly.
- Countersunk holes take #4 (M2.9), #6 (M3.5) or #8 (M4.2) flat-head screws (DIN 7982); use wall plugs to suit your wall.
- Check the slots give enough open area for your fan or duct.
Wall vent cover with folded rim
By Brox Metals
A slotted cover for a wall vent, fan outlet or duct opening. The rim folds back on all four sides to hide the wall opening, and countersunk screw holes in the corners let flat-head screws sit flush.
- Made by
- Laser cutting and folding
- Shown in
- Aluminium Mill finish 3 mm
- Overall size as shown
- 205 × 205 × 28 mm
RM 138.94 for one as shown, before tax.
Order this partSet your sizes, choose your material, finish and quantity, and see the price and ready date before you pay.
What you can change
| As shown | You can choose | |
|---|---|---|
| Face width | 200 mm | 100 to 600 mm |
| Face height | 200 mm | 100 to 600 mm |
| Rim depth | 25 mm | 24 to 60 mm |
| Slot columns | 2 | 1 to 6 |
| Slot width | 6 mm | 3 to 20 mm |
| Bar width | 6 mm | 3 to 20 mm |
| Hole type | Countersunk #6 (M3.5) | 4 choices |
| Hole position | 20 mm | 16.5 to 70.5 mm |
Some ranges depend on the other sizes and on the metal you choose.