Good to know
- All sizes are outside sizes of the folded channel.
- The side holes are at the same height on both sides, so a bolt or pin passes straight through.
- Base holes sit on the centre line of the base and are spread evenly along the length.
- Countersinks open on the inside of the channel, in the base and both sides. In brushed, PVD or powder-coated sheet they open on the finished face: set Coloured side to Inside of the bend to keep them inside.
U channel bracket
By Brox Metals
A folded U bracket with holes along the base and matching holes through both sides, for clamping a tube or beam, a pivot or a clevis pin. Set the base width, each side height and length, and the holes.
- Made by
- Laser cutting and folding
- Shown in
- Mild Steel Mill finish 3 mm
- Overall size as shown
- 60 × 50 × 40 mm
RM 26.16 for one as shown, before tax.
Order this partSet your sizes, choose your material, finish and quantity, and see the price and ready date before you pay.
What you can change
| As shown | You can choose | |
|---|---|---|
| Length | 60 mm | 20 to 1000 mm |
| Base width | 50 mm | 20.6 to 400 mm |
| Side 1 height | 40 mm | 31.8 to 300 mm |
| Side 2 height | 40 mm | 31.8 to 300 mm |
| Holes in the base | 2 | 0 to 5 |
| Base hole type | Plain clearance hole | 9 choices |
| Base bolt size | M6 (6.6 mm hole) | 7 choices |
| Holes in each side | 1 | 0 to 5 |
| Side hole type | Plain clearance hole | 9 choices |
| Side bolt size | M6 (6.6 mm hole) | 7 choices |
| Side hole height | 25 mm | 10.3 to 33.2 mm |
| Hole distance from ends | 10 mm | 6.3 to 25.2 mm |
Some ranges depend on the other sizes and on the metal you choose.