Good to know
- Pipe sizes are steel pipe outside diameters to ISO 65 / EN 10255 (DN15 21.3 mm to DN100 114.3 mm). Measure other pipes and use Other size.
- Sizes are after folding: the walls sit the pipe diameter plus twice the clearance apart, and the top sits the pipe diameter plus the clearance above the surface.
- Foot length runs from the end of the foot to the inside face of the side wall, as the drawing measures it.
- With 0 clearance the strap just touches the pipe. For a firm grip on bare pipe, fit a rubber liner and set the clearance to its thickness.
Pipe saddle clamp
By Brox Metals
A folded strap clamp that holds a pipe or conduit flat against a wall, floor or frame, sized for standard DN15 to DN100 steel pipe or any outside diameter. Two feet with screw holes, with room for a rubber liner if you want one.
- Made by
- Laser cutting and folding
- Shown in
- Stainless Steel 304 2B 1.5 mm
- Overall size as shown
- 100 × 36 × 25 mm
RM 34.87 for one as shown, before tax.
Order this partSet your sizes, choose your material, finish and quantity, and see the price and ready date before you pay.
What you can change
| As shown | You can choose | |
|---|---|---|
| Pipe size | DN25 (1 in), 33.7 mm | 10 choices |
| Clearance | 1 mm | 0 to 30 mm |
| Strap width | 25 mm | 20 to 150 mm |
| Foot length | 32 mm | 21 to 100 mm |
| Fixing screws | M6 (6.6 mm holes) | 4 choices |
| Holes per foot | 1 | 1 to 1 |
| Finished face | Outside of the clamp, the face you see | 2 choices |
Some ranges depend on the other sizes and on the metal you choose.