Good to know
- Leg lengths are outside sizes, measured over the bend as on a drawing of the folded bracket.
- Each row of holes sits on the centre line of its leg and is spread evenly along the width.
- Countersinks open on the inside of the bracket, so screw heads sit flush inside the corner. In brushed, PVD or powder-coated sheet they open on the finished face: set Coloured side to Inside of the bend to keep them inside.
- Plain holes are ISO 273 medium-fit clearance holes for the bolt size chosen.
L angle bracket
By Brox Metals
A folded angle bracket with a row of bolt holes along each leg. Set the leg lengths, width and bend angle, then choose plain, countersunk or tapped holes for each leg.
- Made by
- Laser cutting and folding
- Shown in
- Mild Steel Mill finish 3 mm
- Overall size as shown
- 50 × 50 × 40 mm
RM 18.83 for one as shown, before tax.
Order this partSet your sizes, choose your material, finish and quantity, and see the price and ready date before you pay.
What you can change
| As shown | You can choose | |
|---|---|---|
| Base leg | 50 mm | 20.6 to 400 mm |
| Upright leg | 50 mm | 20.6 to 400 mm |
| Width | 40 mm | 20 to 1000 mm |
| Bend angle | 90° | 30 to 130° |
| Holes in the base leg | 2 | 0 to 3 |
| Base hole type | Plain clearance hole | 9 choices |
| Base bolt size | M6 (6.6 mm hole) | 7 choices |
| Holes in the upright leg | 2 | 0 to 3 |
| Upright hole type | Plain clearance hole | 9 choices |
| Upright bolt size | M6 (6.6 mm hole) | 7 choices |
| Hole distance from ends | 10 mm | 6.3 to 15.2 mm |
Some ranges depend on the other sizes and on the metal you choose.