Good to know
- Sizes are after folding: depth runs from the front of the lip to the back of the wall flange.
- Keyholes: the screw head passes through the round part, then the shelf drops so the screw sits at the top of the slot. Leave the screw heads 3 to 4 mm proud of the wall.
- The ends are cut square and left open.
- A shelf this thin is for light loads; for heavy pots or long shelves add brackets underneath or use thicker sheet.
- Fix into wall plugs or studs that suit the load.
Stainless wall shelf with keyhole fixings
By Brox Metals
A folded stainless steel wall shelf with a small upturned front lip and a back flange that screws to the wall. Choose keyholes to hang it on screw heads, slots to level it, or plain holes.
- Made by
- Laser cutting and folding
- Shown in
- Stainless Steel 304 Hairline 1.2 mm
- Overall size as shown
- 600 × 250 × 80 mm
RM 147.71 for one as shown, before tax.
Order this partSet your sizes, choose your material, finish and quantity, and see the price and ready date before you pay.
What you can change
| As shown | You can choose | |
|---|---|---|
| Length | 600 mm | 220 to 1500 mm |
| Depth | 250 mm | 100 to 450 mm |
| Front lip height | 20 mm | 15 to 50 mm |
| Wall flange height | 80 mm | 50 to 200 mm |
| Fixing holes | Keyholes (hang on screw heads) | 4 choices |
| Screw size | M4 or #8 (4 mm) | 3 choices |
| Number of fixings | 2 | 2 to 5 |
| End fixing inset | 60 mm | 30 to 250 mm |
| Finished face | Top of the shelf | 2 choices |
Some ranges depend on the other sizes and on the metal you choose.