Good to know
- Two clamp bands or hose clamps pass through the flange slots and round the pole; slots are 5 mm wide for bands up to 1 mm thick.
- Poles wider than the plate rest on the flange edges; narrower poles, square posts and strut sit inside the channel.
- Hole spacing is centre to centre: check it against your box's mounting holes or lugs.
- Sizes are outside sizes of the folded bracket.
- Press-in nuts in stainless sheet must be stainless types; tell us if you will supply your own.
- Use stainless bands outdoors so the bracket and clamps don't rust against each other.
Junction box pole-mount bracket
By Brox Metals
A folded channel bracket that mounts a junction box or small enclosure to a pole, post or strut with two clamp bands. Four box fixing holes, plain, tapped or with press-in nuts, and band slots in both side flanges.
- Made by
- Laser cutting and folding
- Shown in
- Stainless Steel 304 2B 2 mm
- Overall size as shown
- 200 × 100 × 30 mm
RM 47.28 for one as shown, before tax.
Order this partSet your sizes, choose your material, finish and quantity, and see the price and ready date before you pay.
What you can change
| As shown | You can choose | |
|---|---|---|
| Bracket length | 200 mm | 80 to 1000 mm |
| Plate width | 100 mm | 50 to 300 mm |
| Flange depth | 30 mm | 22 to 80 mm |
| Hole type | Plain clearance holes | 7 choices |
| Hole size | 5.5 mm | 3.4 to 13 mm |
| Hole spacing across | 60 mm | 10 to 76.5 mm |
| Hole spacing along | 150 mm | 10 to 186.5 mm |
| Clamp band width | 20 mm | 8 to 40 mm |
| Clamp spacing | 140 mm | 27 to 168 mm |
| Coloured side | Outside of the folds | 2 choices |
Some ranges depend on the other sizes and on the metal you choose.