Good to know
- Sizes are after folding: length and width are outside sizes, side height is from the underside to the rim.
- Each corner has a small relief notch, about twice the sheet thickness, so the sides fold cleanly. Seal the corners with food-safe silicone if the tray must hold water.
- Drain holes suit a 1/2 inch or 3/4 inch BSP tank connector (bulkhead fitting) or a plain weep hole.
- Fixing holes are 5.5 mm clearance for M5 screws (ISO 273 medium fit).
- The last side is folded between the other three, so very tall sides on a small tray may need a check.
Drip tray with drain
By Brox Metals
A folded stainless drip tray or planter tray with closed-up corners. Set the size and side height, and add a drain hole for a standard tank fitting if you need one.
- Made by
- Laser cutting and folding
- Shown in
- Stainless Steel 304 Hairline 1.2 mm
- Overall size as shown
- 400 × 300 × 30 mm
RM 128.17 for one as shown, before tax.
Order this partSet your sizes, choose your material, finish and quantity, and see the price and ready date before you pay.
What you can change
| As shown | You can choose | |
|---|---|---|
| Length | 400 mm | 120 to 1200 mm |
| Width | 300 mm | 120 to 800 mm |
| Side height | 30 mm | 12 to 100 mm |
| Drain hole | 1/2 inch BSP tank fitting (21.5 mm hole) | 4 choices |
| Drain position | Near the right-hand end | 2 choices |
| Fixing holes | None | 3 choices |
| Finished face | Inside of the tray | 2 choices |
Some ranges depend on the other sizes and on the metal you choose.