Good to know
- Holes are ISO 273 medium clearance holes for the bolt size chosen.
- Edge distance and hole spacing never go below EN 1993-1-8 minimums (1.2 and 2.2 times the hole).
- The last hole on each leg sits as far out as the sloping edge allows; spacing sets the rest.
- Each tip is cut off square (about 6% of the shorter leg, at least 10 mm) so there is no sharp point.
Corner gusset plate
By Brox Metals
A triangular gusset that stiffens a square corner between two beams, posts or frame rails, with a row of bolt holes along each leg and an optional lightening hole. The holes keep standard edge distances and spacing whatever size you choose.
- Made by
- Laser cutting
- Shown in
- Mild Steel Mill finish 6 mm
- Overall size as shown
- 200 × 200 mm
RM 34.94 for one as shown, before tax.
Order this partSet your sizes, choose your material, finish and quantity, and see the price and ready date before you pay.
What you can change
| As shown | You can choose | |
|---|---|---|
| Horizontal leg | 200 mm | 119 to 800 mm |
| Vertical leg | 200 mm | 119 to 800 mm |
| Corner clip | 15 mm | 0 to 50 mm |
| Bolt size | M10 (11 mm holes) | 5 choices |
| Holes on horizontal leg | 3 | 0 to 3 |
| Holes on vertical leg | 3 | 0 to 3 |
| Hole row from edge | 25 mm | 14 to 50 mm |
| First hole from corner | 45 mm | 43 to 151 mm |
| Hole spacing | 50 mm | 25 to 53 mm |
| Lightening hole | Yes | Yes or no |
| Lightening hole size | 40 mm | 20 to 41 mm |
Some ranges depend on the other sizes and on the metal you choose.