Good to know
- Sizes are outside sizes after folding. The return folds back from the top of the front.
- The brushed face is the front, the outside of the fold.
- #4 countersunk screws suit 2 mm sheet. Larger screws need thicker sheet, or we check the countersink depth with you first.
- Return holes are 4.5 mm clearance holes for #8 or M4 screws.
- Vent slots are 6 mm wide with 8 to 10 mm of metal between them. Check the open area your appliance maker asks for.
- Runs longer than 3 m are made in two pieces and butted together.
Kitchen cabinet plinth (kick plate)
By Brox Metals
A brushed stainless steel plinth for the base of kitchen cabinets, with a folded top return for stiffness. Made to your length and height, with flush countersunk fixing holes and an optional vent for built-in appliances.
- Made by
- Laser cutting and folding
- Shown in
- Stainless Steel 304 Hairline 2 mm
- Overall size as shown
- 1200 × 100 × 25 mm
RM 200.79 for one as shown, before tax.
Order this partSet your sizes, choose your material, finish and quantity, and see the price and ready date before you pay.
What you can change
| As shown | You can choose | |
|---|---|---|
| Length | 1200 mm | 300 to 3000 mm |
| Height | 100 mm | 60 to 200 mm |
| Top return | 25 mm | 15 to 60 mm |
| Fixing | Screws through the front | 3 choices |
| Front holes | Countersunk for #4 (M2.9) screws | 4 choices |
| Front holes from top | 20 mm | 15 to 61 mm |
| Largest hole spacing | 400 mm | 150 to 800 mm |
| Vent slots | Yes | Yes or no |
| Vent length | 450 mm | 100 to 1100 mm |
| Vent centre from left end | 600 mm | 275 to 925 mm |
| Vent rows | 3 | 1 to 4 |
| Slot length | 60 mm | 20 to 150 mm |
| Coloured side | Outside of the bend | 2 choices |
Some ranges depend on the other sizes and on the metal you choose.